MICHAEL

TECHNICAL REQUEST RIDER

Unless the venue is providing sound and lights, the following Technical Request is for larger size venues, with occupant capacity exceeding 200. For smaller size venues, please direct us to the area you wish to have us set-up!

I. Electrical Power

Indoor: Minimum four (4) separate grounded 20 amp/120volt circuits. All power should be located within thirty (30) feet of the stage.
Outdoor: Minimum six (4) separate grounded 20 amp/120 volt circuits; two (2) separate thirty (30) amp/120 volt circuits. All power should be located within thirty (30) feet of the stage.
Sound/Lights Area: Minimum four (4) separate 20 amp/120 volt circuits, located within six feet of the S/L area.

II. Stage Area
Indoor: Twelve (12) to sixteen (16) feet wide by ten (10) feet deep area. Drum riser six (6) feet by six (6) feet by at least eighteen (18) inches.
Outdoor: Twenty (20) feet wide by twelve (12) feet deep. Drum riser six (6) feet by six (6) feet by at least eighteen (18) inches. Also, request the addition of water-proof, tent/canopy, large enough to cover staging area, with four (4) mobile sides in the event of inclement weather.

III. Sound Lights Area
Indoor: Six (6) feet wide by five (5) feet deep, at least twenty-five (25) feet from the stage.
Outdoor: Same as indoor with the addition of ten (10) foot by ten (10) foot water-proof, tent/canopy with four (4) mobile sides in the event of inclement weather.

IV. Access to all areas should be available no less than two and one-half (2 1/2) hours prior to specified showtime.

Thank you for your consideration in reviewing this technical rider. It is designed to minimize complications and therefore assure your event to be the most successful.

If you have any questions, please call: Grones Media: 920-851-4713, or email: jgrones@gmail.com


Copyright PIRPro.com 2009